If you’ve ever felt the backache after mortising a door or cursed under your breath while wrestling a panel at the wrong angle, you’re not alone. As woodworkers, cabinetmakers, and finish carpenters, we know how vital ergonomics are—not just for comfort but for accuracy too.
Enter Dash-Board’s Door and Panel Supports, a game-changing accessory designed to bring ease and efficiency to vertical workpiece handling.
Whether you’re working on full-sized doors or fiddly cabinet parts, these supports offer the perfect combination of stability, comfort, and control.
The Role of Ergonomics in Woodworking
Let’s face it—woodworking is tough on the body. As the years go by (and we all get a bit more seasoned), the strain can start adding up.
Ergonomics isn’t just some fancy word; it’s a lifeline for staying pain-free and productive. With Dash-Board’s Door and Panel Supports, you can position doors, panels, and even trim at just the right height, keeping things easy on your back and wrists while maintaining full control over your work.
The result?
Better precision, less strain, and more time enjoying the craft.
Key Features of Dash-Board’s Door and Panel Supports
So, what’s so special about these supports? First, they come in a set of two and are exclusively compatible with The Dash-Board and ShortCut benches—so make sure you’ve got one of those handy.
The supports are designed to hold doors and panels upright at an optimal height, giving you the freedom to work vertically without the usual balancing act. Whether you’re aligning hinges, working on lock mortises, or handling smaller pieces, these supports provide a stable, easy-to-clamp solution that’s both time-saving and accurate.
It’s like having an extra pair of hands—without the coffee breaks or sick days.
Enhanced Mortising and Hinge Installation
You know the drill: mortising entry doors or installing hinges can be a real challenge if the door’s wobbling or the workpiece is too low.
Dash-Board’s Door and Panel Supports eliminate the hassle by locking your door in place, at a comfortable height that doesn’t kill your knees or your patience.
Cleaner cuts, better control, and less time fumbling around. Whether you're routing out spaces for hinges or installing locks, these supports help you get the job done faster and with greater precision.
Simplifying Edgebanding for Small Components
Now, let’s talk about the smaller stuff.
Cabinetmakers, you know what I’m talking about—edgebanding those cabinet parts that always seem to slide around.
With the Dash-Board Door and Panel Supports, you can clamp these components securely, keeping them steady and at a height that lets you focus on getting a perfect result. No more improvising with makeshift supports or hunching over awkwardly to keep the piece in place.
The Door and Panel Supports turn your Dash-Board bench into a versatile tool for all kinds of fine work.
Versatility in Your Workshop
One of the standout features of Dash-Board’s Door and Panel Supports is their adjustable platform. That means whether you’re handling a full-sized entry door, a cabinet panel, or delicate trim pieces, you can adjust the height to suit the job at hand.
This flexibility makes them an invaluable tool for carpentry work of all kinds—from door hinge routing to lock mortising to trim carpentry and joinery. It’s like having a mini adjustable scaffolding system that fits right into your workshop.
Seamless Integration with Dash-Board and ShortCut
Integrating the Door and Panel Supports into your Dash-Board or ShortCut bench setup is as easy as it gets.
Simply attach them to the existing workbench, and you're ready to roll. There's no complex setup or extra tools required. The supports tighten securely in place, turning your bench into a 21st-century door bench for all your vertical workpiece needs.
Even better, they’re small enough to store easily when not in use, meaning you can keep your workspace organized and efficient.
FAQs on Door & Panel Supports
What workbenches are compatible with Door and Panel Supports?
The Door and Panel Supports are exclusively compatible with Dash-Board and ShortCut workbenches. They are not designed for use with other benches.
Can the supports handle heavy doors or large panels?
Yes, the supports are built to handle heavy doors and large panels, providing a stable, ergonomic setup for tasks like mortising, routing, and hinge installation.
How easy is it to install the Door and Panel Supports?
The supports are very easy to install. They attach directly to the Dash-Board or ShortCut benches with simple knobs, requiring no additional tools.
Can the Door and Panel Supports be adjusted for different workpiece sizes?
Yes, the supports are adjustable, allowing you to securely position various sizes of workpieces, from full-size doors to smaller cabinet components.
Do the Door and Panel Supports help with tasks like edgebanding or trim work?
Absolutely. The supports are perfect for securing small pieces like cabinet components or trim, making processes like edgebanding easier and more precise.
